Dust Binding Mat Adhesive Mat SIMTACK® HT

Our "SimTack Dust Binding Mats" consist of 30 layers of self-adhesive PE film and reliably remove particles and fibres from shoe soles and castors.Due to the completely adhesive underside, the dust binding mats adhere securely to the floor.If the top layer is appropriately soiled, it is simply peeled off.Film adhesive mat SIMTACK white (also called Stickymat or Tackymat) for the transition from the grey room to the clean room. Material & properties Material: Polyethylene film Size: approx. 114 x 66 cm Normal adhesive strength Colour: white Total thickness: approx. 1,5 mm Thickness single: approx. 0,045mm water-based adhesive RoHs conform with indicator for remaining film on the mat For universal use Antistatic material properties Packaging 1 mat with 30 layers of film 4 or 8 mats in one carton

The "SBM Dust Binding Mat" is made of permanently adhesive material without glue and without impregnation that is laid loose. The stickiness is a fixed property of the material. The mat is easy to clean. Treat with a sponge and soap solution and then dry with a rubber scraper. Can be treated with common disinfectants. The material does not release any softeners or undesirable chemical substances. No fixings are required. Simply place on cleaned floor. The perfect connection from the grey room to the clean room. Material & Properties Material: SBM Colour: blue permanently adhesive material Effective and reliable dust, dirt barrier Easy to clean with water, soapy water and common disinfectants No release of plasticisers or chemical substances No brackets or special subfloors required Ideal for access to ultra-clean or clean rooms The material is resistant to a lot of chemical influences such as acids or bases Physical state:resistant Odour:odourless Softening point:> 120° C Flash point:> 190° C Explosive properties:non-explosive Vapour pressure (at 23° C):< 0.1 hPa Density (at 20°) C:1.26 g/cm (DIN 51757) Water solubility:not soluble Ignition temperature:> 300° C Colour:Blue RAL 5001 Packaging 1 piece in a carton

The "Cleanroom Sponge Cloth D-3" is excellent for wet wiping and high absorption of liquids. The material structure allows it to clean any shape of workpiece without releasing particles. It is the sponge cloth for places where cleanroom compliance is required. The material is heat resistant up to 60° or moist heat. The integral structure of the sponge cloth is absolutely lint-free, abrasion-resistant and offers very good absorption of liquids. The micropores support efficient cleaning of surfaces. Ecological because reusable and washable, thus reducing waste. Excellent for washing hard disks and silicon wafers. On delivery, the sponge is already pre-moistened and ready for immediate use. Material & Properties Material: Special polyurethane Length: 125 mm Width: 85 mm Height: 35 mm Pores Ø (µm): 80 Colour: white Pre-moistened with a water solution of sodium dehydroacetate. High water absorption capacity Heat resistant up to 60°C Washable Abrasion resistant Lint-free Micropores on the surface Packaging 1 piece in a bag 75 bags in a carton (75 pieces)

Our "SimTack Dust Binding Mats" consist of 30 layers of self-adhesive PE film and reliably remove particles and fibers from shoe soles and rollers.Due to the completely adhesive underside, the dust binding mats adhere securely to the floor.If the top layer is appropriately soiled, it is simply peeled off.Film adhesive mat SIMTACK white (also called Stickymat or Tackymat) for the transition from the gray room to the clean room. Material & Properties Material: polyethylene film normal adhesive strength Color: white Total thickness: approx. 1,5 mm Thickness single approx. 0,045mm Water based adhesive RoHs conform With indicator for remaining film on the mat 30 layers with indicator Packaging 1 mat with 30 layers of film 4 or 8 mats in carton