- Polyester/Carbon
- White or blue
- Autoclavable
The Reusable Cleanroom Hood has snap fasteners to attach the mouthguard.
Material & Properties
- Material: 98 % Polyester / 2 % Carbon
- Color: white or blue
- Weave structure: 3/2 twill
- Base weight: 118 g/m²
- Particle filtration 0.3µm / 0.5 µm
- ISO 4
- EU GMP A - C /US FED Std 10 - 100,000
- With front snap fasteners
- 2 snap fasteners for mouth guard attachment
- Push buttons at the back of the head
- Pattern: Plaid 5mm * 5mm
- Possible sterilization methods: Steam autoclave, gamma irradiation
- Beta irradiation, ETO: steam - gamma
- Breathability ISO 9237-2:1995: 18.10 l/m².
- Water tightness DIN EN ISO 11092:2014 Ret: 2.71 m² Pa/W
- Tear strength ISO 13934/1:2013: warp 830 N / weft 1500 N
- Abrasion resistance ISO 12947/2:1998: > 100,000 cycles
- Decay time EN 1149-3: 0.01 sec
- Particle retention: 0.3 µm = 98%, 0.5 µm = 98%, 5.0 µm = 98%
The reusable garment is made of lightweight micropolyester fabric
1. maximum washing machine load : 60%.
2. washing chemicals: anionic / non-ionic, preferably pure anionic agents with good dispersing properties
3. maximum pH: 8 - 8.5. close zipper and push buttons before washing.
4. prewash: maximum 35°C - 10 minutes
5. main wash: maximum 60°C - 15 minutes
6. cool down 1°C per minute up to 50°C to avoid wrinkles
7. rinse ( 2 x ) and neutralize with 1 cc/kg acetic acid 80%, 10 min at 40°C
8. last rinse: we recommend an antibacterial and antistatic detergent
9. dry gently and slowly
10. Dry in the dryer at maximum 85°C
APPLICATION
For optimal effectiveness: try to wear clothes as closed as possible and try to avoid air holes at the neck. Air formation in the clothing (blow-up effect) must be avoided. Have your cleanroom clothing decontaminated and washed in time to avoid contamination in the cleanroom. Cleanroom clothing is not water repellent and quickly absorbs water and chemicals. Small holes and tears should be repaired (patched) as soon as possible. Cleanroom clothing should not come into contact with solvents, chemicals, disinfectants and stain removers
MAINTENANCE
The washing frequency depends on the working environment (microelectronics - pharmaceutical ...) and working conditions. The cleanroom garments should be washed in a cleanroom laundry. The maximum washing temperature is 60°C - Do not iron! The addition of chlorine is prohibited in the washing process. A thorough rinsing and neutralization. A PH- value between 5.5 and 6 should be achieved. If dry cleaning is required: only with perchloroethylene. When drying in a dryer, a low speed is recommended. Maximum shrinkage: less than 3%.
Packaging
- 1 piece
| ISO Klasse: | 4 |
|---|---|
| Disposable/Reusable: | Reusable |
| Material: | Karbon, Polyester |