Marken
PU:
Carton with 8 pieces
Dimensions:
660 x 1440 mm (8 Mats)
Our "SimTack Dust Binding Mats" consist of 30 layers of self-adhesive PE film and reliably removeparticles and fibres from shoe soles and castors.Due to the completely adhesive underside, the dust binding mats adhere securely to the floor.If the top layer is appropriately soiled, it is simply peeled off.Film adhesive mat SIMTACK white (also called Stickymat or Tackymat) for the transition from the grey room to the clean room.
Material & Properties
Material: polyethylene film
increased adhesive strength
Colour: white
Total thickness: approx. 1,5 mm
Thickness single: approx. 0,045mm
water-based adhesive
RoHs conform
with indicator for remaining film on the mat
30 layers with indicator
Packaging
1 mat with 30 layers of film
8 mats in carton
PU:
Bag with 100 pieces
Available
Size:
XS
The "Riverstone LE-TACKY" is a nitrile cleanroom glove with very low residue levels. Unlike other nitrile gloves, no sulphur or zinc oxides are added to the glove during manufacture. The very good stretch behaviour exceeds that of the nitrile gloves known to us so far - even that of some neoprene gloves by far.
Material & Properties
Material: 100 % Nitrile
Colour: White
Length: Min. 300 mm
Thickness: 0.08 mm +/- 0.02 mm
Can be worn on both sides
ISO 4
Hardly extractable substances
Powder-free
Latex-free
Textured fingertips
Rolled rim
Very low particle shedding
Very stretchable, supple and grippy
Without plasticisers, contain no phthalates ester, silicone oil and amide
Washed with 0.1m high resistance water with> 17 MegaOhm water and packaged in an ISO 4 clean room environment
Packaging
100 pieces per bag
10 bags per carton
PU:
Bag with 4 pieces
Available
The "Mini Mop VMMS17" from Vipers is a sterile and high quality disposable mop. It is made of high performance microfibre which gives it a high absorption capacity to absorb a large amount of liquid and is ideal for cleaning critical areas such as insulators.
Material & Properties
Material: Polyester microfibre
Length: 190 mm
Width: 70 mm
Colour: white
ISO 4
GMP A
Absorbency > 500%, max. 715% (5720 ml/m²)
Ultrasound-sealed edges and seams
Low particle shedding of the material
Packaging
4 pieces in a vacuum-sealed bag
5 pouches outer bag
15 outer bags in a carton (300 pieces)
PU:
Bag of 100 pieces
Available
Size:
XS
The Cleanroom Glove "SIMTEC NGTU30" is an ultra thin nitrile glove with textured fingertips.It has a pleasant wearing comfort due to the production from a flexible, chlorine- and powder-free material.
Material & Properties
Material: Nitrile
Length: 300 mm
Colour: white
Width of palm: 83 mm (+/- 3 mm)
Weight (per piece): 4.8 g (+/- 0.3 g)
Thickness (single-walled)
Cuff: 0.065 mm (+/- 0.02 mm)
Palm: 0.095 mm (+/- 0.02 mm)
Fingertips: 0.14 mm (+/- 0.02 mm)
Ultra-thin
Hypoallergenic
Free from accelerators
Low-particle
Textured fingertips
Powder-free
Ambidextrous
Double-packed pouches
ISO 5
Protein content (ASTM D 5712): not available
Powder content (ASTM D 6124): 2 mg/glove (max)
Physical properties (ASTM D 6319)
Before ageing
Tensile strength: > 14 MPa
Elongation capacity: > 500%
After ageing
Tensile strength: > 14 MPa
Elongation capacity: > 400%
Number of particles: < 1,200/cm²
Non-volatile residues (DI extraction): < 10 µg /cm²
Silicone oil presence by FTIR (hexane extraction): Absent
Packaging
100 pieces in a bag
10 bags in a carton
PU:
Bag with 150 pieces
The " Cleanroom wipe Vipers® P115" is a light polyester wipe and versatile. It is suitable for wiping and cleaning in critical environments.
Material & Properties
Material: 100% Polyester continuous filament
Colour: White
Length: 230 mm
Width: 230 mm
Thickness: 0,53 mm
Basic weight: 115 g/m²
ISO 5
Edge cut Laser cut
For universal use in cleanrooms
Economical
High suction power
Abrasion-resistant under heavy use
Lightweight
Red indicator dot to identify sterility, Lot. No. on each label and individual pouch, gamma-irradiated and sterile according to AAMI guidelines
Packaging
150 wipes in a bag
10 bags in a carton
Tip
PU:
1 piece
Available
Length:
200 cm
Our new "SimStep Tough Permanent Adhesive Mat" is a high-performance decontamination mat with outstanding properties and extreme resilience, also loadable with forklift trucks.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free.
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria.
Low profile yet highly stable mat handles heavy carts, pallet trucks and even forklift traffic
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, storage and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 120 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 10, +6.4 cm edge material per side), but can easily be cut to desired dimensions
Thickness: approx. 4 mm
Surface resistance: 108 Ohm
Load capacity: approx. 130 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material.
PU:
1 Stück
Available
The lightweight "SimSafe PC01" protective suit is made of high-quality and low-linting microporous coated material. This soft spunbonded polypropylene has been additionally equipped with a layer of polyethylene laminate. The suit thus offers protection against hazardous dusts type 5 and light liquid splashes type 6. Elastic inserts at the hips, ankles and wrists as well as a thumb loop ensure a comfortable fit and improved freedom of movement. The zip cover flap can be taped off and offers additional protection.Material & PropertiesMaterial: Microporous Polypropylene with Polyethylene film Colour: white Sterile Hooded protective suit With elastic hood, wrists, ankles and waist Front zip with wide cover flap Provides liquid and barrier protection Excellent breathability and water vapour permeability High-quality comfort and protection Antistatic Clean Easy handling Individually packed in sealed polyethylene bags Particle emission rate <1,200 particles/min Cleanliness level 1 Helmke Drum Packaging 1 Piece in a bag 35 Bags in a carton (35 pieces)
PU:
Bag with 10x10 pieces
Available
The cleanroom wipe "Vipers SP140" is an ultra-soft polyester knitted wipe, with a high filament count. This makes it softer and more absorbent than conventional polyester wipes.
Material & Properties
Material: Polyester
Length: 230 mm
Width: 230 mm
Basic weight 140 g/m²
Colour white
Thickness 0,38 mm
ISO 5
GMP A/B
Sterile
Edges ultrasonically sealed
Solvent resistant
Extremely low linting and very low particle emission
Absorption capacity 415 ml/m
Uptake speed ≤ 1.0 sec.
Packaging
10 x 10 wipes in a bag (double packed)
10 bags in a carton
PU:
Bag with 5 pieces
Der "Vipers Mopp VMSP50" ist ein steriler Einweg Mopp und besitzt ein äußerst hochwertiges Mikrofaser-Besatzmaterial aus 100% Mikro-Polyester.
Dank seiner besonderen Oberflächenstruktur überzeugt dieser Einweg Mopp durch eine hervorragende Reinigungsleistung, eine akkurate Flächenleistung und einem sehr guten Preis-Leistungs-Verhältnis.
Material & Eigenschaften
⦁ Material: Mikrofaser⦁ Länge: 400 mm⦁ Breite: 125 mm⦁ Höhe: 5 mm⦁ Farbe: weiß⦁ Gewicht: 50 g (± 5%) pro Mopp⦁ ISO 4⦁ GMP A⦁ steril (gammabestrahlt)⦁ Ultraschallversiegelte Kanten und Nähte
Anwendung/Einsatzgebiet
⦁ Reinraum-Mopp mit Taschen, für 40 cm Mopp-Systeme⦁ Höchste Reinigungsleistung durch hochwertiges Mikrofaser⦁ Hohe Flächenleistung durch mehrlagigen Flüssigkeitsspeicher⦁ Gleichmäßige und ideale Flüssigkeitsabgabe⦁ Aufnahmekapazität > 500% IEST-RP-CC004.3
Verpackung
⦁ 5 Stück in einem vakuumverpacktem Beutel⦁ 20 Beutel in einem Karton
PU:
Bag with 20 pairs
Available
Size:
6.0
The "Latex cleanroom glove SimTec® LG040-S" is a gamma sterilised glove with textured fingers and palm.
Material & properties
Natural rubber latex, powder-free.
Hand specific, rolled cuff, textured palm and fingers
Colour: Natural
Length: 400 ± 10 mm
Particles: <1200 per cm² > 0,5 µm
Thickness
Fingertip 0,23 ± 0,02 mm
Palm 0,20 ± 0,02 mm
Cuff 0,13 ± 0,02 mm
Packaging
Bag with "easy tear opening"
1 pair per PE bag
20 PE bags per welded (double) polybag
8 poly chisels per double-walled carton
160 pairs per carton
PU:
Bag with 20 pairs
Available
Size:
5,5
Der "Nitril-Reinraum-Handschuh SimTec® NG030-S" ist ein gamma sterilisierter Handschuh mit texturierten Finger und Handfläche.
Material & Eigenschaften
Nitril Polymer; Accelerator frei, puderfrei
Handspezifisch, Rollrand, texturierte Handfläche und Finger
Neongrün
Länge: 300 ± 10 mm
Partikel: <3000 per cm² > 0,5 µm
Stärke
Fingerspitze 0,16 ± 0,02 mm
Handinnenfläche 0,14 ± 0,02 mm
Manschette 0,09 ± 0,02 mm
Verpackung
Beutel mit “Easy-Tear-Öffnung”
1 Paar pro PE Beutel
20 PE Beutel pro verschweißtem (doppeltem) Polybeutel
200 Paar pro Karton
PU:
Bag with 150 pieces
Available
The cleanroom wipe "Vipers P140L" is a double woven polyester wipe with high abrasion resistance.All edges are laser welded to minimise particle and fibre shedding.
Pre-wetting a bag once saves reprocessing costs and ensures pre-moistened wipes are always ready to hand.The low liquid release enables cleaning during operation with little or no risk of accidents.Replacing the cloth after 6m² with a new one prevents contamination carry-over.Can be used on both smooth and perforated floor coverings.
Material & Properties
Material: Polyester
Length: 580 mm
Width: 230 mm
Thickness: 0.48 mm
Colour: white
Basic weight: 140 g/m2
ISO 5
Edge cut: laser welded
Absorption capacity: 320 ml/m2
Uptake speed: ≤ 0,5 sec
Packaging
150 wipes in a bag
6 bags in a carton
PU:
1 piece
Available
Dimensions:
1000 x 100 x 3 mm
The "stainless steel metal rail" is a border material for your SimStepMat. Suitable for extreme loading capacity, e.g. by forklift trucks.
Material & Properties
Material: stainless steel
Length: 1000 mm
Width: 100 mm
Height: 3 mm
Edges are lasered
Bevelled
Drilled
Drill holes chamfered
without further processing
according to sample
Packing
1 piece
PU:
Bag with 100 pieces
Size:
S
The "Cleanroom Glove SimTec® NGB030" is a nitrile glove suitable for medical use. It has textured fingertips and can be worn on both sides.
Material & Properties
Material: 100% Nitrile
Length: 300 mm
Thickness: approx. 0,11 mm
Colour: Blue
ISO 5
PPE CAT III
Hypoallergenic
Low particulate
Textured fingertips
Powder-free
Can be worn on both sides
Charge on each pack
Double wrapped pouches
Chlorinated surface
ISO 374-5:2016: Protection against micro-organisms
ISO 374-1:2016/Type C: Protective gloves against hazardous chemicals;Liquid-tight gloves tested for NaOH 40% = Level 6
Packaging
100 pieces in a bag (50 pair)
10 bags in a carton (500 pairs)
PU:
1 piece
Available
Length:
100 cm
Our "SimStep" permanent adhesive mat is a high-performance decontamination mat with outstanding properties.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free.
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria.
Low profile yet highly stable mat handles heavy carts and lift trucks
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, stocking and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 200 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm border material per side), but can easily be cut to desired dimensions
Thickness: approx. 2 mm
Surface resistance: 108 Ohm
Load capacity: approx. 90 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material
PU:
Bag with 300 Pieces
Available
The cleanroom wipe "Vipers PNW68" is a white, hydroentangled, non-woven, spunbonded polyester wipe formed without binders, starches or thermal bonding techniques for a chemically clean surface that is strong, clean and absorbent.
Material & Properties
Material: Polyester Nonwoven
Colour: white
Length: 230 mm
Width: 230 mm
Thickness: 0.45 ± 0.5 mm
Basic weight: 68 ± 4 g/m2
Absorption capacity: > 400 ml/m2
ISO 5
Pliable, highly absorbent and durable
Well suited for IPA and other solvents
Packaged in a class 100 clean room
Non-organic: ideal for applications where microbiological factors are important
Ideal cloth for cleaning surfaces that are susceptible to scratching
Packaging
300 wipes in a bag
8 bags in a box (2400 wipes)
PU:
Bag with 50 pieces
The cleanroom wipe "Vipers MF200" has a silk character and is suitable for very sensitive surfaces.It consists of polyester/nylon micro denier continuous filament and impresses with its very low particle emission, residue and ion content.
Material & Properties
Material: Polyester/nylon blended fabric (microfibre).
Length: 230 mm
Width: 230 mm
Colour: white
Thickness 0.43 ± 0.05 mm
Basic weight 197 g/m²
ISO 4
RoHS compliant
Washable and autoclavable
Ideal for applications requiring maximum cleanliness
Superior wiping performance for cleaning delicate components or surfaces
Double packed
Edge cut laser sealed
Absorption capacity ≤ 300 ml/m2
Absorption speed ≤ 3 sec.
Packaging
50 wipes in a bag (double-packed)
20 bags in a case
PU:
Bag with 20 pairs
Available
Size:
5,5
The "Latex cleanroom glove SimTec® LG030-S" Is a gamma sterilised glove with textured fingers and palm.
Material & properties
Natural rubber latex, powder-free
Hand specific, rolled cuff, textured palm and fingers
Colour: Natural
Length: 300 ± 10 mm
Particles: <1200 per cm² > 0,5 µm
Thickness
Fingertip 0,20 ± 0,02 mm
Palm 0,18 ± 0,02 mm
Cuff 0,12 ± 0,02 mm
Packaging
Bag with "easy tear opening"
1 pair per PE bag
20 PE bags per welded (double) polybag
10 poly bags per double-walled carton
200 pairs per carton
PU:
1 piece
Available
Length:
100 cm
Our "SimStep" permanent adhesive mat is a high-performance decontamination mat with outstanding properties.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free.
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria.
Low profile yet highly stable mat handles heavy carts and lift trucks
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, stocking and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 200 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm border material per side), but can easily be cut to desired dimensions
Thickness: approx. 2 mm
Surface resistance: 108 Ohm
Load capacity: approx. 90 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material
PU:
1 Piece
Available
These goggles are designed for use in rooms with controlled contamination such as sterile and clean rooms.Among other uses, it is also used in aseptic conditions, including but not limited to the chemical, pharmaceutical, electronic industries or hospital laboratories. These goggles are designed to withstand multiple sterilisation in an autoclave without any noticeable changes. The careful design allows for long service life and maximum transpiration, offering a wide field of vision and use over all prescription eyewear.
Material & Properties
Material: Polycarbonate / Silicone
Lens thickness: 1.8 mm
Nose piece width: 50 mm
Nose piece height: 20 mm
Total width: 175 mm
Total height: 85 mm
Headband thickness: 2 mm
Headband width: 11.8 mm
Colour: blue / transparent
Sterilisable in autoclave under steam. Lens, frame and band are resistant to 40 cycles autoclave (121'C, 110kPa, 20min).
The lens is replaceable. The frame is made of thermoplastic rubber which remains stable even during multiple sterilisations
11.8 mm wide silicone strap with 2 mm thick adjustable strap length with a polycarbonate snap clip.
Wide panoramic field of vision made of impact-resistant polycarbonate, high-quality anti-fog lens
Indirect ventilation on the top of the goggles to protect against chemical splashes
Compatible or fits on most prescription glasses
Packaging
1 piece
PU:
Bag with 600 pieces
Format:
ca. 10 x 10 cm
The cleanroom wipe "Vipers P140" is an ultra-soft knitted polyester wipe with a high filament count. This makes it softer and more absorbent than conventional polyester wipes.
Material & Properties
Material: Polyester
Dimensions: 10x10 cm, 15x15 cm or 23x23 cm
Basic weight 140 g/m²
Colour white
Thickness 0,38 mm
ISO 5
Edges ultrasonically sealed
Solvent resistant
Extremely low linting and very low particle emission
Absorption capacity 415 ml/m
Uptake speed ≤ 1.0 sec.
PU:
Bag with 100 Pieces
The "Cleanroom glove Riverstone Nitrilstat blue" is a double-sided nitrile glove with a very low particle emission. Due to its textured fingertips it has a good grip.Material & PropertiesMaterial: NitrileLength: min.290 mmPalm Thickness: 0,12 ± 0,02 mmColour: blueISO 4Can be worn on both sidesTextured fingertipsVery low particle emissionWithout plasticisers, contain no phthalate esters, no siliconeoil and amideTensile strength (MPa): min.14,0Elongation at break (%): min. 500Surface resistance (Ohm / sq) ≤ 9.9 x 1010Single bag and vacuum sealed Packaging100 Pieces in a bag ⦁ 10 Bags in a carton (1000 Pieces)
PU:
Bag with 50 Wipes
Format:
ca. 30 x 30 cm
The "Cleanroom Wipe VIPERS® P-ESD-240" by VIPERS is made of double-knitted continuous filament of quilted polyester.It convinces with its high absorption capacity and wiping efficiency.The integrated carbon is a conductive yarn that dissipates electrical charges.Ideal for applications in critical ESD areas that require high sorption capacity.
Material & Properties
Material: polyester with carbon
Length: 230 mm
Width: 230 mm
Thickness: 0.82 - 0.90 mm ± 0.05 mm
Colour: white with carbon stripe
Base weight: 240 g/m²
ISO 4
Surface resistance (1 side): 1x106 -1x109 ohm / sq
Double knitted interlock cloth
Laser sealed edges
Absorbency: 600 ml/m²
High absorbency and wiping power
Very low content of submicron particles and fibres
Double packed and vacuum packed
No silicone oil, amide, DOP
Packed in clean room
Packaging
230 x 230 mm and 300 x 300 mm
50 wipes in one bag
8 bags in a box (400 wipes)
150 x 150 mm
200 wipes in one bag
8 bags in one carton (1600 wipes)
100 x 100 mm
300 wipes in one bag
10 bags in one carton (3000 wipes)
PU:
1 Stück
Available
The lightweight "SimSafe PC01" protective suit is made of high-quality and low-linting microporous coated material. This soft spunbonded polypropylene has been additionally equipped with a layer of polyethylene laminate. The suit thus offers protection against hazardous dusts type 5 and light liquid splashes type 6. Elastic inserts at the hips, ankles and wrists as well as a thumb loop ensure a comfortable fit and improved freedom of movement. The zip cover flap can be taped off and offers additional protection.
Validated sterile.Material & PropertiesMaterial: Microporous polypropylene with polyethylene film Colour: white Sterile Hooded protective suit With elastic hood, wrists, ankles and waist Front zip with wide cover flap Provides liquid and barrier protection Excellent breathability and water vapour permeability High-quality comfort and protection Antistatic Clean Easy handling Individually packed in sealed polyethylene bags Particle emission rate <1,200 particles/min Cleanliness level 1 Helmke Drum Packaging 1 Piece in a bag 35 Bags in a carton (35 pieces)
PU:
Bag with 5x20 pieces
Available
Format:
ca. 30 x 30 cm
The "VIPERS® SPC68 Cleanroom Wipe" is an economical sterile all-purpose cleanroom wipe. It is highly absorbent, resistant, soft and wipes without leaving scratches. It can be used wet and dry. Suitable for use with isopropanol and other solvents. Very low particle and ion release, free of silicone oil and amides.
Material & Properties
Material 55% cellulose / 45% polyester
Basis weight 68 g/m²
Colour White
Thickness 0.30 mm
Edge cut Laser cut
Absorption capacity 288 ml/m2
Pick-up speed 0.8 seconds
Sterile
Economical all-purpose wipe for cleaning smooth surfaces
Absorbent, soft and resistant
Nonwoven fleece
Good compatibility with IPA and other solvents
Packaging
5 x 20 wipes in a bag
15 bags in a carton
PU:
Bag with 20 pairs
Available
Size:
5,5
Der "Nitril-Reinraum-Handschuh SimTec® Steril NG033-S" ist ein steriler 330 mm langer Nitril einmal Handschuh mit Texturierter Handfläche und Finger.
Material und Eigenschaften
Material: Nitril Polymer; Accelerator frei, puderfrei
Handspezifisch, Rollrand, texturierte Handfläche und Finger
Weiß
Länge: 330 ± 10 mm
Partikel: <1200 per cm² > 0,5 µm
ISO 4
GMP A/B
KAT. III
AQL 0.65
Stärke
Fingerspitze 0,16 ± 0,02 mm
Handinnenfläche 0,14 ± 0,02 mm
Manschette 0,09 ± 0,02 mm
Verpackung
Beutel mit “Easy-Tear-Öffnung”
1 Paar pro PE Beutel
20 PE Beutel pro verschweißtem (doppeltem) Polybeutel
200 Paar pro Karton
PU:
Bag of 30 pieces
Available
The "Vipers StarSat VPP36" is a pre-moistened nonwoven
meltblown cloth with a mixture of isopropyl alcohol and
deonized water.
It provides faster, more effective and more accurate cleaning than the alternative dry wipes used manually with alcohol or other cleaning fluids in workplaces.
The resealable bags prevent the evaporation of solvents.Material & PropertiesMaterial: 100% meltdown polypropyleneLength: 230 mmWidth: 280 mmThickness: 0,24 mm Color: white Basis weight 36 ± 3 g/m² ISO 5 Pre-moistened nonwoven cloth With 70% IPA (isopropyl alcohol) / 30% deionized water Resealable bag For general wiping and cleaning in critical environments Absorption capacity/speed 174 ml/m² 1.0 secPackaging30 wipes in a resealable bag20 bags in a carton
PU:
1 piece
Available
Length:
200 cm
Our "SimStep" permanent adhesive mat is a high-performance decontamination mat with outstanding properties.
Properties
Long life - 5+ years on average
No size or area limitation
Easy to maintain
Low mat design
Completely sealed surface; bordered by black bevelled edge strips
No outgassing from the polymer - 100% DOP free
Safe for all cleanroom environments
Antimicrobial technology that prevents the growth of bacteria
Low profile yet highly stable mat handles heavy carts and lift trucks
Advantages
Reduces the number of particles and germs
Ecological savings - replaces disposable adhesive mats, reduces waste and eliminates labour for consumables to be produced and delivered
Significantly reduces air pollution
Proper placement of SimStep mat prevents cross-contamination
The polymer surface provides a pleasant walking comfort
3 treads or 3 wheel rotations guarantee 100% particle and bacteria removal
Complete decontamination in large and inescapable control zones.
Does not lose effectiveness even after being stepped on several times
Disposable overshoes do not get stuck
No transfer of adhesive to the critical areas
SimStep mats are recyclable
Maximum economic efficiency
Cost savings due to elimination of purchasing, stocking and replacement of conventional peel-off adhesive mats
Technical data
Mat width: approx. 120 cm (+6.4 cm edge material per side)
Length: 100-1000 cm (can be ordered in increments of 100, +6.4 cm border material per side), but can easily be cut to desired dimensions
Thickness: approx. 2 mm
Surface resistance: 108 Ohm
Load capacity: approx. 90 kg/cm2
Heat resistance: 0-52°C
In addition to the mat, the scope of delivery also includes bonding and edging material
PU:
10 pairs per bag
Cleanroom polyester socks are another type of specialized footwear designed for use in cleanroom environments. Unlike disposable socks, these socks can be laundered and reused multiple times while still maintaining their cleanliness and effectiveness. These polyester socks are made from 100% Polyester which gives high strength and good wear resistance. It even provides better heat resistance than nylon socks.
This polyester socks are compatible to be used in cleanrooms. It has been tested for particulate levels using the modified Helmke Drum method described in the standard IEST-RP-CC003.4 (Garment System Considerations for Cleanrooms and Other Controlled Environments) and has low particle release compared to regular socks.
It is important to regularly inspect reusable cleanroom polyester socks for any signs of wear, damage, or degradation. Replace socks that show signs of excessive wear or compromise to maintain their effectiveness and prevent potential contamination risks.
Material & Properties
Made from 100% Polyester
Cleaned and packed inside an ISO Class 5 Cleanroom
Reusable cleanroom polyester socks are made from high-quality polyester fabric. Polyester is selected for its low-linting and non-shedding properties, ensuring minimal particle generation and contamination in the cleanroom environment.
These socks are designed to withstand laundering without compromising their cleanliness or performance. It is manufactured with durable construction and materials that can endure repeated washing cycles.
Mid-calf length with elastic cuff for secure fit
Sof t and comfortable
Designed and manufactured for cleanroom applications
Meets the requirement of EU GMP Annex 1 section 7.14
Color coded lining for easy size reference
Packaging
10 pairs per bag
Size:
28 x 43 cm
Die Zyto Arbeitsunterlage SimSorb ist eine stark absorbierende, fusselarme Matte, die durch Gammabestrahlung sterilisiert wird. Sie besteht aus einer 3-lagigen Polyethylenfasermischung. Die oberste Schicht ist eine PE-Folie mit Öffnungen für eine gleichmäßige Verteilung der Flüssigkeit, die mittlere Schicht ist ein latexfreies Airlaid-Papier für die Absorption und die unterste Schicht ist eine rutschfeste PE-Folie, die verhindert, dass verschüttete Flüssigkeiten durch die Oberfläche dringen und die Matte an ihrem Platz hält.
Material & Eigenschaften
Material Deckschicht: PE-Lochfolie
Material Kern: Latexfreies Airlaid
Material Uterschicht: rutschfeste PE-Folie
Maße: 28x43 cm oder 55x40 cm
Basisgewicht: 133,6 g/m²
Stärke: 0,82 - 1,18 mm
Absorptionsfähigkeit: ≥ 607 ml/m²
ISO 5
GMP A
Steril (Gammabestrahlung mit nicht weniger als 25 kGy)
Entwickelt für die einfache Kontrolle und Reinigung bei der Herstellung von gefährlichen Arzneimitteln (HD)
Geeignet für den Einsatz bei der Handhabung oder Verabreichung von Chemotherapie-Medikamenten
Verpackung
50 Stück einzeln verpackt in einem Beutel
4 Beutel in einem Karton (200 Stück)
PU:
Bag with 100 pieces
The "Cleanroom wiper VIPERS® R35" is a lightweight, thin non-woven wipe with extremely high absorbency for fast liquid absorption.
Material & Properties
Material: 50% Rayon / 50% PET (Polyethylene terephthalate)
Length: 250 mm
Width: 250 mm
Thickness 0.22 +/-10% mm
Basis weight 35 g/m² ± 3 g/m²
Colour white
Steam autoclavable
Quarter folded
Edge cut Laser cut
Absorption capacity 300 ml/m²
Uptake speed < 1.0 sec.
ISO 6
Packaging
100 pieces in a bag
30 bags in a carton (3000 pieces)
PU:
Bag with 20 pairs
Available
Size:
6.0
The "Nitrile Cleanroom Glove SimTec® NG040-S" is a gamma sterilised glove with textured fingers and palm.
Material & Properties
Nitrile polymer; accelerator free, powder free.
Hand specific, rolled cuff, textured palm and fingers
White
Length: 400 ± 10 mm
Particles: <1200 per cm² > 0,5 µm
Thickness
Fingertip 0,18 ± 0,02 mm
Palm 0,15 ± 0,02 mm
Cuff 0,09 ± 0,02 mm
Packaging
Bag with "easy tear" opening
1 pair per PE bag
20 PE bags per welded (double-walled) polybag
8 poly bags per double-walled carton
160 pairs per carton
PU:
Carton with 8 pieces
Dimensions:
660 x 1440 mm (8 Mats)
Our "SimTack Dust Binding Mats" consist of 30 layers of self-adhesive PE film and reliably remove particles and fibers from shoe soles and rollers.Due to the completely adhesive underside, the dust binding mats adhere securely to the floor.If the top layer is appropriately soiled, it is simply peeled off.Film adhesive mat SIMTACK white (also called Stickymat or Tackymat) for the transition from the gray room to the clean room.
Material & Properties
Material: polyethylene film
normal adhesive strength
Color: white
Total thickness: approx. 1,5 mm
Thickness single approx. 0,045mm
Water based adhesive
RoHs conform
With indicator for remaining film on the mat
30 layers with indicator
Packaging
1 mat with 30 layers of film
4 or 8 mats in carton
PU:
Bag with 10 Pair
The high "Overboots SimSafe® SOB06-S" are made of 65% polyethylene Bicomponent Fibre, 35% Polyester + PU coating with slip-resistant sole and rubber cuffs (PPE CAT. 1) and offer excellent protection against hazardous substances such as cytostatics, high wearing comfort and best user-friendliness.
The bi-component material specially developed for the SimSafe line dispenses entirely with adhesives when joining the carrier component and the protective component, which means a further predicate for cleanliness with regard to outgassing.
The unique Clean-sealed Technology ensures that barrier protection against particles and liquids is also created at weak points such as seams.Material & PropertiesMaterial: 65% Polyethylene Bicomponent Fibre, 35% Polyester + POE soleSize: Uni sizeLength: approx. 455 mmSole width: approx.120 mmSole length: cs. 320 mmColour: whiteISO 4GMP C/DSpecially packed for cleanroom garmentsElastic topUnique sealing technologyInnovative processed bicomponent material without adhesives for high quality comfort and protectionFully welded hemlineExcellent protection against cytostatic agentsAntistaticPurely packedEasy handling on easy-open bagsVacuum packed pairsIPA-resistant bagsLot No. on each individual bag PackagingPacked in pairs in a bag10 bags per outer bag20 outer bags per carton
PU:
Bag with 1440 pieces
Available
Size:
S
The "Cleanroom Latex Finger Cots" are powder-free finger cots manufactured in a special washing process to reduce ions, non-volatile residues, particles and other contaminants.They are used to prevent contamination through direct contact with the fingers.
Material & Properties
Material: 100% natural latex
Length approx. 63 +/- 3 mm
Thickness approx. 0.09 +/- 0.02 mm
Colour: Natural
Number of particles (0.5 - 20 µm) < 3000 counts/cm²
powder-free
Silicone-free
extensibility: > 700%
Tear strength: > 24 MPa
chlorinated
smooth surface
unrolled
ISO 6
Hole specification: S4 AQL 2,5
Do not contain phthalates, silicone oils, amides
High tensile strength and elongation for maximum tear resistance
Packaging
1440 pieces in a bag
20 bags in a carton (28800 pieces)