Our range includes all gloves that can be used in clean rooms.
We have taken special care that not only product protection gloves, but also gloves certified according to PSA (Personal Protective Equipment) guidelines have been selected. Our cleanroom gloves can be found in many different industries. Whether the pharmaceutical industry, cytostatic pharmacies, semiconductor industry or the optical industry, all have the most diverse requirements.
With our selection we have the right glove for every requirement. Specialities such as heat protection or chemical protection (cytostatics) in clean rooms were very important to us in the selection.
In our selection you will find cleanroom gloves from well-known manufacturers such as Riverstone, Showa, KCL or Ansell.
PU:
Bag with 20 pairs
Available
Size:
6.0
The "Latex cleanroom glove SimTec® LG040-S" is a gamma sterilised glove with textured fingers and palm.
Material & properties
Natural rubber latex, powder-free.
Hand specific, rolled cuff, textured palm and fingers
Colour: Natural
Length: 400 ± 10 mm
Particles: <1200 per cm² > 0,5 µm
Thickness
Fingertip 0,23 ± 0,02 mm
Palm 0,20 ± 0,02 mm
Cuff 0,13 ± 0,02 mm
Packaging
Bag with "easy tear opening"
1 pair per PE bag
20 PE bags per welded (double) polybag
8 poly chisels per double-walled carton
160 pairs per carton
PU:
Carton with bags à 10 pairs
Size:
6.0
The sterile cleanroom latex gloves "BioClean Alpha" from Nitritex (manufacturer code: AL300) are 300 mm (12") long and have an extra thick cuff to prevent them from tearing apart when put on. The gloves are suitable for ISO 4-9 and GMP A-D cleanrooms. The textured surface improves grip.
Material & Properties
Latex
Length: 300 mm
ISO 4
Colour: Natural
Length: 300 mm
Thickness fingertips (min): 0.20 mm
Thickness palm: 0.18 mm
Thickness cuff: 0.16 mm
Surface: Textured
Shape: Hand-specific
Sterilisation: Gamma irradiation
AQL: 1.5
Packaging
1 pair with cuff per sealed inner bag (easy tear).
10 pairs per sealed inner bag
20 inner bags per carton insert
1 carton liner per carton (200 pairs)
PU:
Bag with 30 pairs
Size:
9
Der sterile "Reinraum Handschuh G3 Sterling" ist ein PSA-Kategorie III-zertifizierter Reinraumhandschuh für eine Vielzahl von anspruchsvollen Anwendungen. Die Handschuhe sind handspezifisch und bestehen aus sterilem Nitril, was zu einer besseren Kontaminationskontrolle führt, die eine Reihe von strengen regulatorischen Bedingungen erfüllt. Die ungepuderten Handschuhe bieten eine bequeme Passform, die für ein doppeltes Anziehen geeignet ist.
Material & Eigenschaften
Material: Synthetisches Nitrilpolymer (Acyrilnitril-Butadien)
Länge ca. 300 mm
Stärke:
Mittelfinger: 0,10 mm
Handfläche: 0,08 mm
Manschette: 0,07 mm
Farbe: grau
ISO 3
GMP A
KAT III
Statisch dissipatives Verhalten im Gebrauch
Sicherer Halt beim Umgang mit Gegenständen durch
verbesserte, gleich bleibende Griffigkeit
Ausgezeichnetes Fingerspitzengefühl und Tastempfinden
Puderfrei
Geringer Gehalt an Endotoxinen (<20 Endotoxineinheiten/Paar)
Latexfrei
Manschette mit Rollrand
Vollständig texturiert
Handspezifisch
Verpackt in Polyethylentaschen und -beuteln zur Verwendung in Reinräumen
Verpackt zum Anziehen unter aseptischen Bedingungen
Verpackung
einzeln verpackt
30 Paar in einem Beutel
10 Beutel in einem Karton (300 Paar)
PU:
Bag of 100 pieces
Available
Size:
XS
The Cleanroom Glove "SIMTEC NGTU30" is an ultra thin nitrile glove with textured fingertips.It has a pleasant wearing comfort due to the production from a flexible, chlorine- and powder-free material.
Material & Properties
Material: Nitrile
Length: 300 mm
Colour: white
Width of palm: 83 mm (+/- 3 mm)
Weight (per piece): 4.8 g (+/- 0.3 g)
Thickness (single-walled)
Cuff: 0.065 mm (+/- 0.02 mm)
Palm: 0.095 mm (+/- 0.02 mm)
Fingertips: 0.14 mm (+/- 0.02 mm)
Ultra-thin
Hypoallergenic
Free from accelerators
Low-particle
Textured fingertips
Powder-free
Ambidextrous
Double-packed pouches
ISO 5
Protein content (ASTM D 5712): not available
Powder content (ASTM D 6124): 2 mg/glove (max)
Physical properties (ASTM D 6319)
Before ageing
Tensile strength: > 14 MPa
Elongation capacity: > 500%
After ageing
Tensile strength: > 14 MPa
Elongation capacity: > 400%
Number of particles: < 1,200/cm²
Non-volatile residues (DI extraction): < 10 µg /cm²
Silicone oil presence by FTIR (hexane extraction): Absent
Packaging
100 pieces in a bag
10 bags in a carton
PU:
Bag with 5x10 pairs
Available
Size:
8.0
The sterile Neoprene glove "TouchNTuff #73-500" is free of accelerator chemicals and offers an outstanding combination of touch sensitivity and robustness in sterile environments.Material & PropertiesMaterial: Neoprene (polychloroprene)Length: 300 mmWall thickness: min. 0,11 mmColour: beigeISO 5GMP AsterileSuitable for cytostatics according to ASTM D6978 (not listed in US FDA 510k)Form: Anatomical with forward curved fingersPowder-freeSmoothGAMMA irradiation (25kGy)Contains no natural rubber latexThin gloves for exceptional tactile sensitivityResistant to a wide range of chemical splashesIdeal for double glovingAvoids Type I latex and Type I chemical allergyPolyurethane inner coating allows easy on/off with dry or wet handsPackaging1 Pair individually packed10 Pairs in a PE inner bag5 PE inner bags in a PE outer bag4 PE outer bags in a carton (200 pairs)
PU:
Bag with 20 pairs
Available
Size:
6.0
The "Nitrile Cleanroom Glove SimTec® NG040-S" is a gamma sterilised glove with textured fingers and palm.
Material & Properties
Nitrile polymer; accelerator free, powder free.
Hand specific, rolled cuff, textured palm and fingers
White
Length: 400 ± 10 mm
Particles: <1200 per cm² > 0,5 µm
Thickness
Fingertip 0,18 ± 0,02 mm
Palm 0,15 ± 0,02 mm
Cuff 0,09 ± 0,02 mm
Packaging
Bag with "easy tear" opening
1 pair per PE bag
20 PE bags per welded (double-walled) polybag
8 poly bags per double-walled carton
160 pairs per carton
PU:
Bag with 1440 pieces
Available
Size:
S
The latex-free "Cleanroom Nitrile Finger Cots" are antistatic and powder-free. They are washed in class 100 / ISO 5 and double packed.These finger cots are recommended for use with electrostatic sensitive equipment/components in areas such as ESD, defence, aerospace, marine, electronics, consumer, watch and jewellery industries, repair stations and assembly areas in manufacturing environments or cleanrooms.
Material & Properties
Material: 100% pure nitrile
Length: 65 mm +/- 10 mm
Thickness min. 0.09 mm
Colour: Natural white
ISO 5
antistatic, powder- and silicone-free
without plasticiser
contains no phthalate esters, silicone oil and amide
surface resistance (Ohm / sq): <= 1010
Particle count (0.5 - 20 microns, cum): <3000 counts / cm²
Smooth surface
rolled
Packaging
1440 pieces in a bag
20 bags in a carton (28800 pieces) double packed and vacuum sealed
PU:
Bag with 5 pairs
Available
Size:
M
The "Dailove H4 glove" is a wafer-thin solvent-resistant protective glove made of special polyurethane.
Material & Properties
Polyurethane
Length: 300mm
Color: black
Thickness: 0,1mm
Semi-transparent black
Surface resistance 103-106 Ω
Antistatic
Hand-specific
Wafer-thin
High tactile sensitivity
Powder-free
Excellent resistance to tears, punctures and abrasion
Resistant to many solvents, including trichloroethene (TCE) and isopropanol (IPA)
RoHS: Contains no cadmium, lead, mercury or hexavalent chromium
Levelverte
Cat.II
EN16350:2014 Protective gloves - Electrostatic properties
Fields of application
Oil refining, painting, solvent manufacturing, dust cleaning, commercial printing,Petrol handling, gunpowder handling
Packaging
Bag with 5 pair
PU:
Bag with 100 pieces
Size:
S
The "Cleanroom Glove SimTec® NGB030" is a nitrile glove suitable for medical use. It has textured fingertips and can be worn on both sides.
Material & Properties
Material: 100% Nitrile
Length: 300 mm
Thickness: approx. 0,11 mm
Colour: Blue
ISO 5
PPE CAT III
Hypoallergenic
Low particulate
Textured fingertips
Powder-free
Can be worn on both sides
Charge on each pack
Double wrapped pouches
Chlorinated surface
ISO 374-5:2016: Protection against micro-organisms
ISO 374-1:2016/Type C: Protective gloves against hazardous chemicals;Liquid-tight gloves tested for NaOH 40% = Level 6
Packaging
100 pieces in a bag (50 pair)
10 bags in a carton (500 pairs)
PU:
Bag with 1440 pieces
Available
Size:
S
The "Cleanroom Latex Finger Cots" are powder-free finger cots manufactured in a special washing process to reduce ions, non-volatile residues, particles and other contaminants.They are used to prevent contamination through direct contact with the fingers.
Material & Properties
Material: 100% natural latex
Length approx. 63 +/- 3 mm
Thickness approx. 0.09 +/- 0.02 mm
Colour: Natural
Number of particles (0.5 - 20 µm) < 3000 counts/cm²
powder-free
Silicone-free
extensibility: > 700%
Tear strength: > 24 MPa
chlorinated
smooth surface
unrolled
ISO 6
Hole specification: S4 AQL 2,5
Do not contain phthalates, silicone oils, amides
High tensile strength and elongation for maximum tear resistance
Packaging
1440 pieces in a bag
20 bags in a carton (28800 pieces)
PU:
Dispenser box of 200 pieces
Available
Size:
S
The "Glove Showa 7502 PF EBT" is a thin nitrile disposable glove designed for sensitive skin.
The 0.06 mm thick nitrile offers good protection against a variety of chemical hazards. And thanks to SHOWA's revolutionary Eco Best Technology (EBT), these gloves are designed for accelerated biodegradation in biologically active landfills.Material & PropertiesMaterial: NitrileLength: 240 mmThickness: 0,06 mmColour: blueCAT IIIDisposable glovesBiodegradableChemical resistantLatex-freeUnpowderedEco Best Technology® (EBT)Accelerator-free Can be used ambidextrously Packaging200 pieces in a dispenser box10 dispenser boxes in a carton ( 2000 pieces) Packaging infoSize XXL 180 pieces in a dispenser box
PU:
Dispenser box with 100 pieces
Size:
6,5-7
Ansell's NeoTouch 25-101 is a disposable synthetic glove made of polychloroprene (neoprene) with high comfort. It is suitable for protection against Type I allergies and provides excellent protection against acids, bases and alcohols.
Material & Properties
Material: Polychloroprene
Length: 240 mm
Thickness: 0,13 mm
Color: Light green
Textured fingertips
Can be worn on both sides
Powder-free
Rolled edge
AQL: 1.5
PPE category III
EN 374 (low protection against chemical risks,protection against bacteriological contamination)
Packaging
100 pieces in a dispenser box
10 dispenser boxes in a carton (1000 pieces)
PU:
bag with 10 pairs
Available
Size:
9
Der BioClean "Ultimate" (Hersteller-Code: BUPS) von Nitritex ist ein steriler Zytostatika-Schutzhandschuh aus Polychloropren mit exzellenten antistatischen Eigenschaften und verbesserter Griffigkeit dank texturierter Oberfläche. Der Handschuh ist latexfrei, um Latexallergien vom Typ 1 zu eliminieren. Exzellenter chemischer und zytotoxischer Schutz und außerordentliches Tastempfinden. Der BioClean Ultimate ist Teil des BioClean-C Chemotherapie Sortiments.
Material & Eigenschaften
Material: Polychloropren
Farbe: Natur
Länge: 300 mm (12")
Form: handspezifisch
Oberfläche: texturiert
Puderfrei
Latexfrei
Rollrand
Steril (Sterilisationsmethode: Gammabestrahlung)
AQL: 0,65
Empfehlung: Reinraumklasse ISO 4 und GMP A
Normen und Klassifikationen
DIN EN 420:2003
DIN EN 455 (Teil 1, 2 & 3)
DIN EN 374-1:1, 2 & 3:2003
Kategorie 3
ASTM 6978-05 getestet gegen zytotoxische Medikamente / Pharmaka
Verpackung
Ein Paar pro versiegeltem innerem EasyTear PE-Beutel
10 Beutel pro versiegeltem äußeren PE-Beutel
20 Außenbeutel pro gefütterten Karton (200 Paare)
PU:
Box of 100 pieces
Available
Size:
6/XS
The versatile, biodegradable 6112PF disposable glove prioritises sensitivity and dexterity. The 4mil/0.10mm thick nitrile is also waterproof and provides extreme comfort for extended wear.
Approved for food handling and contact, these gloves are ideal for food preparation, laboratory use and general repair and maintenance.
The 6112 PF gloves are completely environmentally friendly through the use of SHOWA's Eco Best Technology ®, degrading up to 82% in just 386 days when tested in the laboratory.Material & PropertiesMaterial: NitrileLength: 240 mmThickness: 0.10 mmColour: blackCAT IIIBiodegradableTight fittingDisposable glovesLatex-freeWater repellentTextured fingertipsEco Best Technology® (EBT)ErgonomicLight weightWithout carrier fabricUnpowdered PackagingSize 6/XS - 10/XL100 pieces in a dispenser box10 dispenser boxes in a carton (1000 pcs)Size 11/XXL90 pieces in a dispenser box10 dispenser boxes in a carton (900pcs)
PU:
Carton with 200 pairs
Size:
9
Ansell's "DermaShield 73-721" is a synthetic glove made of polychloroprene (neoprene) that provides optimal product and user protection and is intended for non-sterile, controlled environments. The neoprene formulation minimises the risk of Type I and Type IV allergies while providing better chemical protection than natural latex. Ideal for use in the pharmaceutical industry.
The DermaShield™ 73-721 is intended for non-sterile, controlled environments.
Material & Properties
Material: Neoprene (polychloroprene)
Length: approx. 310 mm
Thickness palm: 0,16 mm
Thickness fingers: 0,12 mm
Colour: green
ISO 5
GMP C/D
Shape: Anatomical, with fingers bent forward
Cuff rolled edge with SUREFIT™ technology
Powder-free
Textured fingertips
Double gloving possible as outer or under glove
Excellent abrasion resistance and robustness
Outstanding protection against chemical splashes
Packaging
20 pairs in a PE inner bag
1 PE inner bagin a PE outer bag
2 PE outer bags in an outer bag
5 outer bags in a box (200 pairs)
PU:
Bag with 10 pairs
Available
Size:
6.5
Der sterile "Reinraumhandschuh BioClean Emerald" aus Nitril schützt vor einer Vielzahl von Chemikalien und eignet sich ideal für eine Doppelbehandschuhung. Er ist frei von Beschleunigerchemikalien, seine Latexfreiheit vermeidet eine Latexallergie.Die anatomische Passform gewährleistet Tragekomfort, vermeidet eine schnelle Handermüdung und ermöglicht eine gute Fingerbeweglichkeit.
Material & Eigenschaften
Material: Nitril
Länge: 300 mm
Farbe: Grün
ISO 4
GMP A
KAT III
Zytostatika geeignet
Steril (Sterilisationsmethode: Gammabestrahlung)
Handspezifisch
Texturiert
Puderfrei
Latexfrei
Rollrand
AQL: 0,65
Protein-Level: - (Nitril enthält keine Naturlatex-Proteine)
Hypoallergen
Exzellenter Chemikalienschutz
Normen
ASTM D6978
CE 0598
EN 420:2003 + A1:2009
EN 421:2010, EN 455 Part 2
EN ISO 374-5:2016, Lebensmittelkontakt, Kategorie III
auf Zytostatika getestet gemäß ASTM 6978-05ASTM 6978-05
Verpackung
paarweise verpackt
10 Paar in einem Außenbeutel
20 Außenbeutel in einem Karton (200 Paar)
PU:
Bag with 20 pairs
Available
Size:
5,5
The "Latex cleanroom glove SimTec® LG030-S" Is a gamma sterilised glove with textured fingers and palm.
Material & properties
Natural rubber latex, powder-free
Hand specific, rolled cuff, textured palm and fingers
Colour: Natural
Length: 300 ± 10 mm
Particles: <1200 per cm² > 0,5 µm
Thickness
Fingertip 0,20 ± 0,02 mm
Palm 0,18 ± 0,02 mm
Cuff 0,12 ± 0,02 mm
Packaging
Bag with "easy tear opening"
1 pair per PE bag
20 PE bags per welded (double) polybag
10 poly bags per double-walled carton
200 pairs per carton
PU:
Bag with 100 pieces
Available
Size:
L
The "Riverstone Tacky" is a 300 mm long, very grippy nitrile cleanroom glove and therefore unbeatable for handling smallest and precision parts. Due to the texturing absolutely sensitive and non-slip, also wearable on both sides.
Material & Properties
Material: Nitrile
Length: 300 mm
Thickness > 0,08 mm
Color White
ISO 5
Powder free
Latex free
Can be worn on both sides
Textured fingertips
Very grippy
Rolled edge
Washed with high quality 0.2 µm filtered deionized water and packed in a certified clean room
No plasticizers, no phthalate esters, silicone oil and amides contained
Areas of application
Medical examinations
Pharmaceutical fields
Chemical industry
Precision mechanics
Semiconductor industry
Packaging
100 pieces per bag
10 bags per carton (1000 pieces)
PU:
Box à 200 pairs (10x bags à 20 pairs)
Size:
6.0
The SHIELDskin Extreme Orange Nitrile 300 DI is a sterile cleanroom glove made of powder-free nitrile/neoprene.
Material & Properties
Material: Nitrile/Neoprene
Length: 300 mm
Thickness: 0.14 mm
Colour: orange
Sterile
ISO 5
GMP A/B
KAT III PPE gloves (PPE Regulation (EU) 2016/425)
69 655X Series
Complex design - against lethal, irreversible risks
Powder-free
Hand-specific
Biological risk (ISO 374-5:2016 VIRUS)
AQL 0.65 (ISO 374-2:2019 Level 3)
Virus penetration test (ISO 16604:2004 Procedure B)
Chemical risk (ISO 374-1:2016+A1:2018 - Type B KPT)
Chemical splash protection - waterproof
Tested for chemical permeation (EN 16523-1:2015+A1:2018)
Typical particle value: less than 1000 per cm² > 0.5µm
Type I protein allergy hazard excluded - Type IV chemical allergy reduced
Vulcanisation accelerator free
Silicone free
Packaging
1 pair per PE peel bag
20 bags per double-sealed PE bag
10 double-sealed PE bags per sealed protective bag
1 sealed protective bag per box (200 pairs)
PU:
Carton with 10x10 pairs
Size:
8.0
The BioClean Nitramax glove (600 mm) for full-arm protection is characterised by high wearing comfort and resistance to a variety of chemicals.
Material & Properties
Material: Nitrile
Length: 600 mm
Colour: white
Thickness:
Palm: 0.15 mm
Fingertip: 0.18 mm
ISO 4
GMP A/B
CAT III
Chlorinated
Protection against a wide range of chemicals
Complete arm protection
Powder and latex free
Rolled edge
Non-particulate EasyTear packaging
Standards and Certificates
CE 0598
EN 420:2003 + A1:2009
EN 421:2010
EN ISO 374-1:2016
EN ISO 374-5:2016
EN 455 Part 2
Food contact
Packaging
1 pair double packed in an inner bag
10 inner bags in one outer bag
10 outer bags in a carton (100pairs)
PU:
Carton with 20x10 pairs
Available
Size:
7.5
The extended version (400 mm) of the BioClean N-Plus nitrile glove protects against a variety of chemicals. Its anatomical fit supports wearing over a longer period of time.The BioClean N-Plus glove is suitable for ISO cleanroom class 4 and offers maximum barrier integrity with a low AQL value of 0.65.
Material & Properties
Material: Nitrile
Length: 400 mm
Colour: white
Cat III
ISO 4
GMP A/B
Sterile
AQL 0,65
Suitable for cytostatic drugs
Anatomical fit
Protection against a wide range of chemicals
Elbow protection
Powder and latex free
No particle release
EasyTear packaging
Standards and Certificates
ASTM D6978
CE 0598
EN 420:2003 + A1:2009
EN 421:2010
EN 455 Part 2
EN ISO 374-1:2016
EN ISO 374-5:2016
Food contact
Packaging
1 pair double packed
10 pairs in an outer bag
20 outer bags in a carton (200 pairs)
PU:
Bag with 10 Pairs
Available
Size:
7/S
Eigenschaften
PVC ohne Trägergewebe (phthalatfreier Weichmacher)
Ungepudert, „Slip-on“-Behandlung
Vorteile
Eine zweite Haut zum Schutz vor Chemikalien
Ultradünner und leichter Handschuh, der sich wie eine zweite Haut anfühlt
PVC ist dicht, schützt die Hand gegen Chemikalien und bleibt flexibel
Undurchlässig für Arbeiten in feuchten oder fettigen Umgebungen
Oberflächenbearbeitung für sicheres Ergreifen rutschiger Objekte
Schutz des Unterarms
Erleichtertes An- und Ausziehen, ohne Flusen und Staub
Ideal für optimale Beweglichkeit und längeres Tragen
PU:
Bag with 10 pairs
Size:
9.0
The BioClean "Indigo" (manufacturer's code: BNPLS) from Nitritex is an individually packaged, powder-free sterile nitrile glove with a length of 300 mm (12") and has excellent antistatic properties. It has been finished in a cleanroom environment to ensure compatibility with ISO 4 cleanroom class and EU GMP A, whilst exceeding the requirements of the PPE glove standard EN 420:2003, the European standard for medical gloves EN 455 (parts 1, 2 & 3) and EN 374:1, 2 and 3:2003 . The BioClean Indigo is latex-free to eliminate type 1 latex allergies. The cost effective alternative to other sterile protective gloves.
Material & Properties
Material: Nitrile
Length: 300 mm
Colour: Indigo
Length: 300 mm
Ambidextrous wearable
Textured fingers for improved grip
Powder-free
Latex free
Rolled edge
Sterile (sterilisation method: gamma irradiation)
AQL: 0.65
Protein level: - (Nitrile does not contain natural latex proteins).
Resistant to a wide range of chemicals.
Physical properties: Exceeds the requirements of the PPE glove standard EN 420:2003, the European Standard for medical gloves EN 455 (parts 1, 2 & 3) & EN 374-1, 2 & 3:2003.
Recommendation: ISO class 4 & GMP A
Classification: Category 3 according to PPE Directive 89/686/EEC
Packaging
1 Pair in an inner bag
10 inner bags in an outer bag
20 outer bags in a box (200 Pairs)
PU:
Bag with 10 pairs
Available
Size:
6.0
The sterile "Suprene Cleanroom Glove" made of neoprene protects against a wide range of chemicals and is suitable for simple double gloving. Its anatomical fit and soft neoprene material ensure ergonomic comfort.Material & PropertiesMaterial: Neoprene (polychloroprene)Length: 300 mmColour: greenShape: Anatomical fitCuff: rolled edgePowder-freeLatex-freeTextured fingertips and palmISO 4EU GMP Grade ASterilisation process: GAMMA irradiation (25kGy)Suitable for cytostatic drugsDouble gloving possibleStrong and robustNo particle releasing EasyTear packagingPackaging1 Pair/PE inner bag1 Bag/sealed PE EasyTear bag10 Bags/sealed PE outer bag20 Outer bags outer box (200 pairs)
PU:
bag with 100 pieces
Available
Size:
6.0
The sterile white "PUREZERO HG3" nitrile cleanroom gloves are designed for use in critical cleanroom environments, such as pharmaceutical and biotechnology cleanroom manufacturing and sterile compounding.These hand-specific gloves undergo a cleanliness process (washed multiple times in deionised water) to ensure consistent control of minor particulates, extractables and endotoxin levels and are recommended for use in ISO Class 3 or above cleanroom environments.As PUREZERO HG3 sterile cleanroom gloves are manufactured from an accelerator-free nitrile polymer, there is less risk of allergy and skin irritation than with accelerator-containing nitrile gloves.
Material & Properties
Material: Nitrile
Sterile
Length: 305 mm
ISO 3
Hand-specific pairs
Smooth surface finish
Textured fingertips
Latex powder and silicone free
Maximum elongation 600%
ISO 5 packed
Tested to ASTM D6978, Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs for handling cytostatic drugs.
Quality and regulatory standards
Complies with these regulatory standards:
ISO 9001
ISO 13485
Complies with these regulatory standards for food handling:
FDA 21 CFR 177-2600
Commission Regulation (EU) 10/2011
Japanese Food Hygiene Law
Accredited according to FDA 21 CFR Section 820
CE 2797 PPE category III according to EU regulation 2016/425 EEC
EN ISO 374-5:2016 Virus protection
EN ISO 374-1:2016/Type C K - Low chemical protection
EN 420:2003 +A1:2009
Packaging
2 gloves in polybag and sleeve
20 Sealed sleeves per bag
10 bags in carton (200pair)
PU:
bag with 100 pieces
Available
Size:
S
The white "PUREZERO HG3" nitrile cleanroom gloves are for use in the manufacture of semiconductor, pharmaceutical and medical devices.These gloves are subjected to a cleanliness process (washed several times in deionised water) to ensure consistent control of minor particulates and extractables and are recommended for use in ISO Class 3 or above cleanroom environments.As the smooth white PUREZERO* nitrile gloves are manufactured without accelerators, there is less risk of allergy and skin irritation than nitrile gloves containing accelerators.
Material & Properties
Material: Nitrile
Length: 305 mm
ISO 3
Ambidextrous wearable
textured fingertips
Latex powder and silicone free
Maximum elongation 600%
ISO 5 packed
Max. Particle count >0.55μm / cm2 <950
Tested according to ASTM D6978, Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs for handling cytostatic drugs.
Quality and regulatory standards
Complies with these regulatory standards:
ISO 9001
ISO 13485
Complies with these regulatory standards for food handling:
FDA 21 CFR 177-2600
Commission Regulation (EU) 10/2011
Japanese Food Hygiene Law
Accredited according to FDA 21 CFR Section 820
CE 2797 PPE category III according to EU regulation 2016/425 EEC
EN ISO 374-5:2016 Virus protection
EN ISO 374-1:2016/Type C K - Low chemical protection
EN 420:2003 +A1:2009
Packaging
Bag with 100 pieces
10 bags in a carton (1000 pieces)
PU:
Bag with 100 pieces
Size:
S
The "RIVERSTONE Nitrilstat" is a latex and powder-free nitrile glove. It has textured fingertips and can be worn on both sides.
Material & Properties
Material: Nitrile
Length: min. 300 mm
Thickness 0.08 mm ± 0.02 mm
Colour white
Recommendation: ISO 4
Latex-free
Powder-free
Textured fingertips
Can be worn on both sides
Rolled edge
No softeners, no phthalate esters, silicone oil and amides included
3 years shelf life
Packaging
100 pieces per bag (50 pairs)
10 bags per carton (500 pairs)
PU:
Bag with 10 Pairs
Available
Size:
XS
These sterile, cut-resistant gloves made from Dyneema® Diamond yarn provide cut resistance and protection during rigorous procedures. Specially designed for optimum dexterity, comfort and fit, they also provide ANSI cut protection level II. The cut resistant gloves are designed to be worn between two cleanroom gloves to provide cut protection during handling of sharp objects or cleaning of equipment that poses a cut risk.
Material & Properties
Material: Dyneema Diamond yarn
Length: XS = 162 mm, S = 174 mm, M = 182 mm , L = 192 mm, XL = 202 mm
Colour: grey
Cuff colour: XS = yellow, S = green, M = orange, L = blue, XL = red
Sterile
CAT II
Level II cut resistance
Optimum finger mobility,
Wearing comfort and fit
Recommended for wearing between two cleanroom gloves
Can be worn on both sides
ANSI cut protection level A2
EN 420:2003 + A1:2009
EN 388:2016
ISO 11137-1:2006
Packaging
1 pair individually packed
10 pairs in an outer bag
10 outer bags in a carton (100 pairs)
PU:
Carton with 1000 pieces
Available
Size:
S
The "Cleanroom Vinyl Glove" is the most cost-effective representative among the disposable gloves and scores points due to the pleasantly soft material that is created when plasticisers are used in the production process.Vinyl gloves have limited stretch and tear easily. Furthermore, they can only be used in areas with a low risk factor and are rather unsuitable for work requiring a high degree of dexterity.
Material & Properties
Material: Vinyl
Length: Min. 300 mm
Thickness: Min. 0.08 mm ± 0.02 mm
Colour Natural white/semitransparent
Powder-free
Latex-free
Can be worn on both sides
Rolled edge
Very low particle emission
Supple and smooth
Plasticiser-free raw material; contains no phthalates, phenols, bisphenols A and nonylphenols
Recommendation: ISO 5
Elongation Min. 350 %.
Tensile strength Min. 9 Mpa
Surface resistance≤ 5.798 Ω
Particle release (LPC) 6.960 particles/cm² (0,5~1,00μm)
Packaging
Bag of 100 pieces
10 bags in carton (1000 pieces)
PU:
Carton with 10 Dispenser boxes with 100 pieces
Available
Size:
XS
The "Micro-Touch Coated" is a powder-free latex examination glove with an inner coating for quick and frequent donning.The examination glove is also certified as a category III PPE product with CE marking, ensuring consistent quality and effective protection for a wide range of applications.
Warning: This product contains natural rubber latex which may cause allergic reactions including anaphylactic shock.
Material & Properties
Material: Natural rubber latex
Length: 240 mm
Finger thickness: 0,11 mm
Colour: white
CAT III
Textured fingers
Powder-free
Polyacrylate inner coating
High elasticity, flexibility and tactile sensitivity
Latex with low allergen content, reduces the risk of contact dermatitis
AQL 1,5
Standards and Certificates
CE 0493
EN 16523-1
EN 421:2010
EN 455 1-4
EN ISO 21420:2020
EN ISO 374-1:2016
EN ISO 374-5:2016
FDA21 CFR 177-2600-US Food Contact Approved
ISO 13485
ISO 9001
ISO 10993-10:2010
ISO 11193-1:2008
Packaging
100 gloves in a dispenser box
10 dispenser boxes in a carton (1000 pieces)
PU:
Carton with 10x10 pairs
Size:
6
The anatomically shaped sterile latex glove BioClean Maxima (600 mm) protects up to shoulder height. Its flexibility makes it extremely comfortable to wear, even over longer periods of time. Natural coloured glove with textured surface, suitable for double gloving; the reinforced rolled edge ensures a firm fit on the arm.
Material & Properties
Material: Natural rubber latex
Length: 600 mm
Thickness palm: 0.18 mm
Colour: Natural
Shape: Anatomical fit
Sterile
ISO 4
GMP A
AQL 1.5
Textured fingertips and palm
Rolled edge
Chlorinated
Flexible and comfortable
Protection up to shoulder height
Powder-free
Simple double glove application
Non-particulate EasyTear packaging
Packaging
1 pair in a PE-EasyTear inner bag
10 inner bags in one PE outer bag
10 outer bags in a carton (100pairs)
PU:
Carton with 200 pairs
Size:
M
The sterile latex cleanroom glove "BioClean Extra" (BLAS) offers elbow protection with a length of 400 mm. Its flexibility and wearing comfort make it suitable for longer periods of wear. This natural coloured glove has a textured surface and a reinforced rolled edge.
Material & Properties
Natural rubber latex
Length: 400 mm
thickness: 0,17 mm
Colour: natural
Can be worn on both sides
Cuff: rolled edge
Powder-free
Textured fingertips and palm
ISO cleanroom grade: 4
EU GMP Grade: A
CAT: 3
Flexible and comfortable
Elbow protection
Powder-free
Rolled edge
Easy double glove
No particle releasing EasyTear packaging
Areas of use
Controlled/critical work areas
Production and manufacturing
Laboratory and R & D
Sterilisation department
Packaging
double packed
1 pair in PE inner bag
1 bag in welded PE-EasyTear bag
10 bags in welded PE outer bag
20 outer bags in outer box (200 pairs)
PU:
4 bags à 50 Pair
Size:
5.5
The Biogel® PI Tech is recommended to be used in any critical environment or controlled environment when a high quality sterile glove is required for protection from cross contamination, preferably in combination with Underglove. It has been tested and cleared for use with chemotherapy agents. Please refer to separate permeation sheet and instructions for use for breakthrough times for chemicals and chemotherapy agents.Biogel gloves are manufactured to be comfortable to wear even when double gloved and maintain dexterity and tactile sensitivity. They are manufactured under strict quality controls. Each glove is subjected to numerous washing cycles and a specific compressed air test.
Material & Properties
Material: Synthetic Polyisoprene
Length: 283-301 mm
Width: 71 - 115 mm
Thickness cuff: 0.20 mm
Thickness palm: 0,25
Thickness finger: 0,27 mm
ISO 5
GMP A
Sterile in accordance with ISO 11137, gamma irradiation, SAL 10-6 (dose of ≥ 25 kGy)
PPE category III, tested and certified against chemicals - permeation protection type B
AQL* of 0.65
Suitable for use in aseptic environments
Biogel hydrogel polymer coating
Fully anatomical fit and smooth surface
Anti-slip cuff with rolled edge
Powder-free
Four-prnetration: bacteriophage test, ISO 16604
Allergenicity: ISO 10993-10 (parts 5 and 10)
Pyrogenicity: ASTM D7102
Labelling/ Packaging: EN 556-1, EN ISO 15223-1, EN ISO 21420
Packaging
Individually packed in high quality polyethylene inner packaging
25 pairs per LDPE inner polybag for sizes 5.5-8.5; 20 pairs for size 9
2 LDPE inner polybags in one LDPE outer polybag
4 outer poly bags per box (200 pairs for sizes 5.5-8.5; 160 pairs for size 9)
PU:
Bag with 20 pairs
Available
Size:
5,5
Der "Nitril-Reinraum-Handschuh SimTec® NG030-S" ist ein gamma sterilisierter Handschuh mit texturierten Finger und Handfläche.
Material & Eigenschaften
Nitril Polymer; Accelerator frei, puderfrei
Handspezifisch, Rollrand, texturierte Handfläche und Finger
Neongrün
Länge: 300 ± 10 mm
Partikel: <3000 per cm² > 0,5 µm
Stärke
Fingerspitze 0,16 ± 0,02 mm
Handinnenfläche 0,14 ± 0,02 mm
Manschette 0,09 ± 0,02 mm
Verpackung
Beutel mit “Easy-Tear-Öffnung”
1 Paar pro PE Beutel
20 PE Beutel pro verschweißtem (doppeltem) Polybeutel
200 Paar pro Karton
PU:
Bag with 20 pairs
Available
Size:
5,5
Der "Nitril-Reinraum-Handschuh SimTec® Steril NG033-S" ist ein steriler 330 mm langer Nitril einmal Handschuh mit Texturierter Handfläche und Finger.
Material und Eigenschaften
Material: Nitril Polymer; Accelerator frei, puderfrei
Handspezifisch, Rollrand, texturierte Handfläche und Finger
Weiß
Länge: 330 ± 10 mm
Partikel: <1200 per cm² > 0,5 µm
ISO 4
GMP A/B
KAT. III
AQL 0.65
Stärke
Fingerspitze 0,16 ± 0,02 mm
Handinnenfläche 0,14 ± 0,02 mm
Manschette 0,09 ± 0,02 mm
Verpackung
Beutel mit “Easy-Tear-Öffnung”
1 Paar pro PE Beutel
20 PE Beutel pro verschweißtem (doppeltem) Polybeutel
200 Paar pro Karton